Viewing time period – 23:46 – 02:54
Well after another long day continuing the commissioning of the observatory it was time to test out Bob’s Tak and see if we could get focus. The first challenge was a bunch of devices were not recognised including the Lakeside focusers. It transpired this was due to me performing cable management by the UPS and accidentally pulling the mount power cable out of the UPS, thus no power to anything on top.
Once I got everything running again I reinstalled the Lakeside v1.1 drivers ( not the v2 drivers as they are for the USB version of the focuser), this meant the focuser was then available and connecting on COM 9. Oh and of course both the hand controllers for the Lakeside where physically powered off with their switches that we forgot to turn back on, so that set me back 20mins to figure out.
I slewed to Arcturus and opened up the dome, the dome being slaved to the scope got very close to where it needed to be. The camera was extremely out of focus as it was set to 0, so all the way in, however it also needed another 57mm of adapters to get the camera to focus!
I also noted visually the offset on TheSkyX for the Tak so that later I could move the FoV indicator to match it.
As can be seen above the offset due to the mounting of the Tak on the side of the RiDK is clearly noticeable and we will have to adjust for this offset when pointing.
I then had problems getting the other Lakeside to connect and noticed the Optec Flip-flat panel software was temperamental and required disconnecting and reconnecting if I left for some time and wanted to open/close. So instead I moved to the RiDK to get the pointing for it instead.
Here is the screenshot from TheSkyX for the RiDK so just slightly off for pointing but I have not Pointed yet nor have I adjusted the polar alignment with PHD2.
I then took a quick image to prove it worked with the camera again since we had all the cabling in bits yesterday.
I also noted a couple of other things that I could start to adjust, so I initially kept the dome and telescope slaved, I then went to Arcturus and then disconnected the slaving of the dome and manually moved the small distance to allow the RiDK to be through the slot and then moved a chunk more for the Tak. We will need a camera with night vision to be able to see the slot and adjust for the Tak and Sky-Watcher Esprit 120.
So fairly cold and tired and I was getting up at 8am to head out for a coffee with my friend Paul, I packed up just before 3am to head off to bed.