Tonight was all about further testing of the travel scope which is now the Esprit 100 refractor. M78 would be the target along with a quick peak at Comet C2022 E3.
Comet C2022 E3
Moving to the Comet and having a quick look I could see how green it was and the the stars were very sharp.
I then slewed to M78 and took a single 600s exposure, however I remembered I had the ZWO Duo-Based filter left in so the reflection nebula is not very apparent, whilst part of the Orion molecular cloud can be seen clearly to the upper right.
So overall a good evening testing the equipment and ready for another trip to Tenerife in March.
So it’s about time I tried to find a replacement for SGPro, given the continued problems with it, it’s less than intuitive design and find something that does not cause friction in my desire to capture more photons from the distant universe! So after looking at NINA briefly earlier this year, I have gone for it this evening to see if I can indeed capture some images.
The problem that set me back once before with NINA was the lack of connection to the FLI focuser. I just simply got an ASCOM error (I really dislike ASCOM). So after some educated guessing I got it connected. Instead of connecting to the FLI focuser directly I actually went through ASCOM which bizarrely cured the error.
With that done. I could now run autofocus, and only the 2nd time in my life this astronomy programme focused on the first go. The only other piece of software that good is the ZWO ASIAIR that I really enjoy because it just works.
I have now connected NINA to PHD2, also to TSX and left TSX to control the dome. I may change this later, however it works just fine and has not caused any problems. The only reason may be to further automate the dome for closing and reporting on status if that is a feature of NINA, something to look into later.
NINA at work
Managed to take 5 or 6 Ha images of 600s this evening before the cloud rolled in. I can use the flats from yesterday. A good evening testing given conditions including the almost full but waining Moon.
Dome open on the freezing night, currently -2℃, and I have fixed the dome slipping for the 2nd time this week, this time putting new grip tape on a hole that had appeared due to the wheel slipping.
M76 600s OIII
Started out imaging M76 which is near the Zenith whilst we watch Harry Potter in the warmth of the lounge buy a roaring fire. After 11 frames of 600s in OIII I have stopped and slewed through Meridian flip and now started on Ha as I have 84 frames of OIII already……
So at 1:15pm I had 23 x 600s Ha on M76. Whilst I need much more and then RGB frames, I want to go to bed and M76 will set shortly to a less than desirable altitude. So I took my flats, darks and flats darks and closed the dome up for the night as the Moon was still fairly full.
For a long while I have had the observatory turned off. All the computers, mount and dome, due to the energy crisis. However, tonight I wanted to make sure the dome still worked and I could image an object so I turned most things back on. There are some things I can do without, including the ASC.
I managed to fight with SGPro to get it to image and slewed to the Soul Nebula. In particular a star galled GSC 4048:1298 which is near a nice Ha region. I found a guide star through the off axis guider and set about imaging 600s subs. I took around 7 before the dome closed due to the moon being so bright the weather statin reported it being too light to image! So the dome closed. I did reopen and get some more data but now it is too late and I need some sleep for work.
Another go at Jupiter tonight. The jet stream from netweather.tv is out of the way. I got really good focus. I managed to use the atmospheric dispersion corrector and get good alignment of the channels. I then took a mixture of 90s and 120s movies. I stacked in Siril and process in PI all on the Mac. So seeing has been my real problem.
GingerGeek came over again and we setup on the patio. I then waited for the clouds to clear at 12:30am before I had 45 mins to capture Jupiter on the Mak180 without the barlow. The jet stream (https://www.netweather.tv/charts-and-data/jetstream) was much better tonight so I could get better focus and the detail on the planet looks better with glimpses of the moons showing.
Not entirely clear this Bank Holiday weekend, however good enough to test out the newly cleaned ASI1600MM with the new desiccant. I received the desiccant from Zoltan at Astronomy365 and cooked in the microwave for 2 mins on medium power before letting cool down and then placing in the camera. I managed to get most of the dust off the sensor, however it is very difficult.
At 00:15 I started to image M72 the globular cluster low down in Aquarius using LRGB 60s on Luminance and 300s on RGB. Note that I will need all new flats today due to the cleaning of the camera. I will leave the observatory running overnight and head off to bed.
Update from this morning, looks like the observatory run all night without a problem and however I believe the object went behind the trees in the distance that have grown after about 10 luminance frame 🙁 I took flats this morning and will take darks tonight.
Back for a second night tonight. M26 is the target again to get some more quality data on the open cluster.
I will set the camera back to Gain 10 Offset 10 to allow for maximum exposure with minimum star saturation. I have had some cloud this evening so far which caused the dome to close. Now it has cleared I have reopened.
Focus run at 22:04 gave 15,965 on Luminance. I left the observatory running at around 12:30am and headed off for bed.
I noticed in the morning the dome had closed and the imaging stopped 40 mins before completion. There may have been clouds so I will check the rest of the frames later. I should have then refocused again later as it drifted again. I reviewed the LRGB frames however the guiding was not brilliant and some of the frames have trailed. I took Flats and Darks in the morning for completeness.
First tonight was to take some 300s darks for the other night for NGC 6765. I only needed 5 of them so spent the first half hour on that.
Then looking at what I could do before the Moon comes up around 11:30pm, I have a couple Messier objects on my list to go after. M26 is the initial one to tackle. I will try a low exposure for luminance and longer on RGB.
Initial focus position is 17,782 for Luminance. I then had to take a new set of darks for the Lodestar camera. I am not sure why these no longer match.
@ 23:53 I started imaging M26 LRGB, L = 60s, RGB = 300s
M26 – Red 300s
Focus run at 1:06am 16,879 for Luminance
Finished imaging just before 2am when the object was too low and the bottom of the dome slit was in the way. I then went on to grab flats and darks.
Tonight John Barrie-Smith and Bob came round to observe with me from Mirador Ellisfield. The temperature has been warm +24c and the humidity average. I assembled the 22″ dob and brought out the 100mm binos.
Bob had a pair of tiny binoculars which whilst we were waiting for darkness to arrive we thought we would try them out. To our surprise when looking at the Moon we could see a star to the East which transpired to DSschubba, a mag +2.2 star in the constellation of Scorpius. This is top star above Antares in the scorpion. This was unseen with the naked eye.
We then realised that the Moon was going to occult this star and that we could watch it happen. So with Bob on the Binos, JBS on the 22″ and I with my Canon 6D with the 300mm lens, we set about watching the event.
We caught the star being occulted by the Moon, but then we struggled as the Moon was setting behind the trees in the distant forest. However around 22:13:20 the star reappeared just as the Moon was setting around +4 degrees altitude. A good result!
Moon setting with the star hidden behind
So after a thrilling and unexpected chase, we set about using the 22″ for some visual. I had started SkyTools 4 for the first time earlier in the day and created my first observing chart. I printed a list of objects to go after and we used this to work through some very appealing and easy targets.
SkyTools V4
M21 was seen by JBS and I before it quickly set behind a tree, however this open cluster looked great.
M102 was easy to see with direct vision. This galaxy looked splendid through the 13mm Ethos eyepiece. This was a long thin galaxy with a slight bulge to the centre. Whilst SkyTools did state the 24mm Panoptic was the best eyepiece to see this with, we felt that the 13mm Ethos was a good option and provided the best view.
John then wanted to go to M101 the Pinwheel galaxy. This is a face on spiral that has a low surface brightness and was rather hard to see. We tried all 3 eyepieces, so the 24mm Panoptic, 13mm Ethos and 31mm Nagler. To prove that this was because it was a harder object to see with relatively low surface brightness and thus did not appear on my SkyTools list of Easy and Obvious objects to see, we set about looking for M51 with it’s associated NGC NGC 5195 interacting galaxy. This was as we noted fairly faint to see also but rather distinct with the 2 objects being visible.
We also looked at an open cluster called the Cooling Tower, M29 or NGC 6913, Bob could see the cooling tower in this little cluster of stars which was bedded into the Milkyway’s rich star field.
We then looked at the Blue Flash nebula, NGC 6905 which did indeed resemble a flash in the pan of oil.
We then went to M5 a glob that was very low down and did appear on the list. The scope was all but horizontal but provided a good view despite the seeing.
Finally we stole a look at M13 which was to compare with M5 and wow it was really bright and steady and the details of the stars within especially with the 13mm Ethos were amazing. It is worth noting that it was fairly high in the sky unlike M5.
Once Bob and JBS packed up and went home around 12:30am I slewed the 12″ in the dome to NGC 6905 the Blue Flash and too a single 2 min Luminance exposure to see what we had seen.
Blue Flash Planetary Nebula NGC 6905Blue Flash cropped 2 min
I then loaded my sequence for NGC 6765 and took a set of LRGB and OIII 300s exposures, x 5 each until 3:45am. I left the scope running until morning and went to bed at 2am. A really good night with friends.
First of all tonight I have taken darks for 300s that are needed for the earlier data. However I am still suffering from the QHY168c disconnecting from the laptop, this time in TSX. I have upgraded the software yesterday but this has not made a difference, so it must be something to do with the way there USB cable is connecting. I will attempt to troubleshoot when I get home. Right now I have switched to Ezcap again which seems to be ok.
I have setup over by Mark and will see what this location is like behind the pool building. I have found that the WiFi is weak or non existent. Also the staff room is nearby and the light is constantly on so maybe not the best place to image from.
@00:03 NGC 6352 30s -20℃ I took a single exposure of this.
First thing tonight is to complete taking the darks from yesterday, so I need 20 x 120s -20℃, but also the flat darks I forgot for the 0.35ms flats. Then I will move to taking longer images tonight. The challenge with open clusters is that you need short exposures so you don’t oversaturate the stars.
@22:50 Omega Centauri 30s -20℃
Omega Centauri
@23:20 Centaurus A 300s -20℃
Centaurus A
@00:09 Makemake 120s -20℃ x 10
@00:29 Haumea 120s -20℃ x 10
@01:07 M8 Lagoon 300s -20℃ x 24 (focus drifted so review later images)
Finally got our bags today from the airport. Having arrives on the 2:05pm flight and not hearing from BA by 4pm, Lawrence and I headed off down the mountain in search of the 4 missing bags. It took just over an hour to arrive back in the Cicar car park.
Once there we headed inside to be told the the Iberia desk, which deals with lost and late baggage was only accessible the arrivals hall and so we were told to go through the exit doors and not to worry about the police. So we nervously😱 walked through and were greated with the sight of all the lost bags!
Blurry Bags
It took some 20 mins to sort through the paperwork before we were pushing the bags back to the car for the 1 hour drive back up the TF1 and TF38.
After a hearty dinner, which was absolutely delicious and filling, we headed outside around 9pm to start setting up. This took me the best part of 2 hours to put the gear together after ferrying it from upstairs and then another 60 mins to calibrate and be ready to image. First up tonight is M23.
@ 23:55 started on M23 Open Cluster, 30s -25℃ exposures so not to saturate the stars.
M23
after 87 images escape hung!
@ 01:20 started on M18 Open Cluster 60s, 10 -20℃ or so images this time using TSX to image and then refocused and took 80 images in total.
M18
@ 3:22 started on M26 Open Cluster -20℃ took 68 at 60s
Visual this evening on the 22″ Dob. The 120 Esprit is still off the MEII so the IMT3b observatory is out of action for a few weeks whilst it is not balanced. The MyT and 120 Esprit are now packed away for the Tenerife trip which is really exciting, first time in over 2 years!
Bob came round this evening and we explored the rather bright sky given the time of year with the dob. So what what did we see?
Observing Notes
M5 seen 23:21 31mm and 13mm better than M3
M3 resolved easily 23:17 31mm and 13mm more compact than M5
M51 massive filled fov in 13mm much smaller in 31mm
M92 seen both eyepieces and very bright
M57 13mm only very large AV central star, very big ring
Tonight is the first night of testing the mobile rig for our 2022 Tenerife BASEG trip. I have just started to setup and am waiting for night to fall. The weather is warm and clear and I am on the IMT3b observing patio.
Tonight is about making sure I can take a set of images and guide and that everything works.
First thing to note is on firing out TSX that I need to change the settings for the mount and select usbmodem1442101 and then connect. This did not work the first time and resulted in an error, disconnecting the USB from the 2 port hub and reconnecting fixed the problem.
Ready to image
Took 44 x 300s on M101 and started to pack up at 3:08 when it was getting light which I could see on the SQM.
M96 galaxy in LRGB on the 12″. Focus position 20691. Started at 22:29. Set up for 4 hours before it disappears behind the trees on the West side of the Meridian. Looking to take 24 x Lum and 8 x RGB all at 300s. Left the dome running and off to bed.
M96 Luminance 300s
The next morning I reviewed the status of the dome and imaging run and it ran al night without a glitch which was great. However the focus drifted quite considerably so I will need to throw away some of the data. What I need to do is cool down the observatory and the mirror before hand which last night I did not due to the last minute decision to image. Also getting the temperature compensation working on the focuser would help, so maybe time to revisit.
I will do another run on M96 on the next clear night.
Tonight is a synchronous group observing campaign with Exoclock. We are going after an exoplanet around star Tycho 1962:0303 / HD 82139. I note that HD 82139 does not come up in TSX but the Tycho star in the right format does. I tried to install the 6GB USNO B database but it fails with an error that the files are not all in the directory. I will try to sort this out later.
Start of transit was 22:28 BST Mid transit 23:37 BST , End of Transit is 00:47 BST, 1 hour after transit is 01:47 BST
I had an initial problem after starting the imaging run, the focuser went back to 14000 again which meant I was out of focus. I only noticed later and then restarted, fortunately before the start of the transit.
Reviewing the files the following evening I noted the dome closed around 00:40 so 7 mins before the end of Transit. I have no idea why the dome closed…….
